华浩达成光电

4 ports USB 3.2 fiber optical converter

产品型号:HL-U3

undefined
华浩达成光电

4 ports USB 3.2 fiber optical converter

产品型号:HL-U3

undefined
华浩达成光电

4 ports USB 3.2 fiber optical converter

产品型号:HL-U3

undefined
华浩达成光电

4 ports USB 3.2 fiber optical converter

产品型号:HL-U3

undefined

Key words:

4 ports USB 3.2 fiber optical converter

Product Model:

HL-U3

Product Description

USB3.2 fiber optic converter is developed by our company with independent intellectual property rights.Absorbed the advantages of similar products at home and abroad,combined with the actual demand of the market,through the one-core optical fiber can transmit 4-channel Super Speed Plus ultra-high speed signal extension of 250 meters.

USB3.2 fiber optic converter uses a special USB PHY to meet the requirements of USB3.2 protocol,and uses 10Gbps SFP to complete the photoelectric conversion and realize the stable transmission of USB3.2 SuperSpeed Plus ultra-high-speed signal.

USB3.2 fiber optic converter consists of a transmitter and a receiver that provides 5V power through the host USB 3.2 type A connector,the transmitter is powered by an external power supply and supplies power to the USB3.2 device through the USB3.2 A type connector.

Note that the bandwidth of 10Gbps is not 10Gbps divided by 8 to get 1250MB/s,it uses the same 10-bit transmission mode as SATA,so its full speed is only 1000MB/s.

Note that 10Gbps (1000MB/s) is the theoretical transmission value.If several devices share a USB channel,the master control chip will allocate and control the bandwidth available to each device.

USB-IF released the latest USB naming specification,the original USB 3.0 and USB 3.1 will no longer be used,all USB 3.0 standards will be called USB 3.2,consider compatibility issues,USB 3.0/USB 3.1/USB 3.2 are called USB 3.2 Gen 1 (5G bps)/USB 3.2 Gen 2 (10G bps)/USB 3.2 Gen 2x2 (20G bps).

Product advantages

1.Complies with the general serial bus 3.2 specification;

2.Complies with USB power delivery 3.2 Gen 1 specification;

3.Supports SuperSpeed Plus (10G bps),SuperSpead (5G bps) rate;

4.Meet the USB Type-C ® standard;

5.Internal USB PHY adopts advanced CMOS process to achieve low power consumption;

6.Support 4 channels independent configuration of USB3.2 signal input;

7.Support PWM LED status indicator;

8.Plug and play,no driver;

9.Downward compatible with USB3.2 Gen 1 (3.0),not compatible with USB2.0 and USB1.1;

Recommended Products


Immediate Consultation

If you are interested in our products, please leave your email, we will contact you as soon as possible, thank you!

Submit Message